Where to find drywall & framing bids in Connecticut: plan rooms and bid sources

Short answer: there is no single place to find drywall and framing bids in Connecticut. State building projects are bid through the Department of Administrative Services (DAS) Construction Services, UConn runs its own procurement site, and cities such as Bridgeport post bids on their own pages. Private work mostly comes by invitation from general contractors. This page lists only the sources we could open and read, and several key ones we could not.

Neighboring states: New York · Massachusetts · Rhode Island

How public and private bids work in Connecticut

Public projects are advertised by the owner: a state agency, a city or county, a university or a school district. The bid notice, plans, specifications and addenda are normally posted on the owner's own site or plan room, and every project shows its bid date. Read each notice for bonding and registration terms.

Private projects are usually bid by invitation. A general contractor or owner decides who receives the documents, and the plans typically sit in a regional plan room, a bid service, or the GC's own portal. As a drywall, framing, insulation or CMU sub you usually price your scope to the GCs who are bidding, so being on the right planholder list matters.

Connecticut bid sources by type and region

Use the access column as a starting point, not a guarantee.

Not every Connecticut owner is in this table. The CTDOT contractor pages and the CTsource portal page did not load or returned not found, and the Hartford, New Haven and Stamford pages we tried were blocked or did not resolve, so those are left out rather than guessed at. We found no builders exchange page we could read. Check them directly if you bid for those owners.

Tips for subs

• Register as a planholder through the official channel. That is how you receive addenda, and some owners publish planholder lists that GCs use to find subs. Where a portal offers alerts by category or commodity code, turn them on.
• Go to the pre-bid meeting when there is one. Whether a meeting exists, and whether attendance is mandatory, is stated project by project in the notice. Read how scope is split between trades while you are there.
• Track addenda until bid day. Wall types, ceiling heights and scope can change, so reprice from the final set and re-check the day before the bid is due.
• Get the official set. Bid notices commonly say which plan room or design professional holds the controlling documents. Plans from another source may be incomplete.
• Check plan quality before you commit. Open the PDF and try to select a line or text. If you can, it is a vector file that can be measured exactly. If the page behaves like one picture, it is a scan and will take longer by hand. Also confirm the wall type legend is on the set; see what happens when it is missing.
• Check bonding and licensing before you price. Public notices often call for bid security and proof of licensing. Read the notice for the exact form.

Once you have the plans

ReadMyBlueprint is takeoff software, not a bid board. It reads vector plan sets for drywall, metal framing, wood framing, insulation and CMU. In our Freeport Square test (21 pages), 68.9% of walls were auto-matched and 99.8% after one "Confirm all." That was one plan set, so treat it as a single data point, and see the tour for how the review step works.

FAQ

Where do I find public construction bids in Connecticut?

There is no single place. State building projects are advertised through DAS Construction Services, UConn has its own procurement site, and cities such as Bridgeport post bids on their own pages. Check CTDOT directly for highway work, which we could not confirm.

Is there an AGC chapter in Connecticut?

The Connecticut Construction Industries Association lists AGC of CT as one of its nine divisions. Its page does not mention a plan room or bid listings.

Is there one statewide plan room or builders exchange for Connecticut?

Our checks did not find a single statewide Connecticut plan room we could read.

Can a subcontractor bid on Connecticut public projects?

Public owners advertise the prime contract, so subs normally price their scope to the general contractors who are bidding it. Read each bid notice for the owner's own rules, including any approved-bidder lists.

What is a planholder and why register as one?

A planholder is a firm that has officially requested the bid documents for a project. Registering usually puts you on the list that receives addenda, and some owners publish planholder lists that general contractors use to find subs. Download plans through the official channel, not from a forwarded link.

How are private bids different from public bids?

Public projects are advertised openly and the documents are usually posted on the owner's site. Private work is usually bid by invitation from a general contractor or owner, and documents come through a regional plan room, a bid service, or the GC directly. Access differs by source.

Does a scanned plan set matter when pricing a bid?

Yes. A vector PDF exported from CAD can be measured exactly, while a scanned plan is only a picture and has to be traced by hand or estimated. Check whether your plans are vector or scanned before you commit to a bid deadline.

Does ReadMyBlueprint list or sell bids?

No. ReadMyBlueprint is takeoff software, not a bid board. Once you have a plan set from any source above, you can upload it and review the takeoff yourself before the bid goes out.