Where to find drywall & framing bids in New Jersey: plan rooms and bid sources

Short answer: there is no single place to find drywall and framing bids in New Jersey. State solicitations are handled through the NJSTART portal and the Division of Purchase and Property, and NJDOT publishes bid openings and advertised construction projects on its Construction Services pages. Private work mostly comes by invitation from general contractors. This page lists only the sources we could open and read.

Neighboring states: New York · Pennsylvania · Delaware

How public and private bids work in New Jersey

Public projects are advertised by the owner: a state agency, a city or county, a university or a school district. The bid notice, plans, specifications and addenda are normally posted on the owner's own site or plan room, and every project shows its bid date. Read each notice for bonding and registration terms.

Private projects are usually bid by invitation. A general contractor or owner decides who receives the documents, and the plans typically sit in a regional plan room, a bid service, or the GC's own portal. As a drywall, framing, insulation or CMU sub you usually price your scope to the GCs who are bidding, so being on the right planholder list matters.

New Jersey bid sources by type and region

Use the access column as a starting point, not a guarantee.

Not every New Jersey owner is in this table. Newark's purchasing page was blocked, Rutgers' procurement page and the AGC of New Jersey site did not load, the NJ Schools Development Authority site did not load, and Jersey City's home page had no bids link, so those are left out rather than guessed at. We found no builders exchange or plan room page that we could read. Check them directly if you bid for those owners.

Tips for subs

• Register as a planholder through the official channel. That is how you receive addenda, and some owners publish planholder lists that GCs use to find subs. Where a portal offers alerts by category or commodity code, turn them on.
• Go to the pre-bid meeting when there is one. Whether a meeting exists, and whether attendance is mandatory, is stated project by project in the notice. Read how scope is split between trades while you are there.
• Track addenda until bid day. Wall types, ceiling heights and scope can change, so reprice from the final set and re-check the day before the bid is due.
• Get the official set. Bid notices commonly say which plan room or design professional holds the controlling documents. Plans from another source may be incomplete.
• Check plan quality before you commit. Open the PDF and try to select a line or text. If you can, it is a vector file that can be measured exactly. If the page behaves like one picture, it is a scan and will take longer by hand. Also confirm the wall type legend is on the set; see what happens when it is missing.
• Check bonding and licensing before you price. Public notices often call for bid security and proof of licensing. Read the notice for the exact form.

Once you have the plans

ReadMyBlueprint is takeoff software, not a bid board. It reads vector plan sets for drywall, metal framing, wood framing, insulation and CMU. In our Freeport Square test (21 pages), 68.9% of walls were auto-matched and 99.8% after one "Confirm all." That was one plan set, so treat it as a single data point, and see the tour for how the review step works.

FAQ

Where do I find public construction bids in New Jersey?

There is no single place. State solicitations are handled through NJSTART and the Division of Purchase and Property, NJDOT lists advertised construction projects on its Construction Services pages, and cities, universities and school districts run their own bid pages.

Do I need an account to bid through NJSTART?

The NJSTART page offers supplier registration with a tax ID, company name and email, and lets visitors browse open bid opportunities from its Supplier Activities section. Whether a particular bid requires a registered account is stated in the bid itself; read it before planning to submit.

Is there one statewide plan room or builders exchange for New Jersey?

Our checks did not find a single statewide New Jersey plan room we could read. The AGC of New Jersey site did not load for us, so we list no chapter plan room.

Can a subcontractor bid on New Jersey public projects?

Public owners advertise the prime contract, so subs normally price their scope to the general contractors who are bidding it. Read each bid notice for the owner's own rules, including any approved-bidder lists.

What is a planholder and why register as one?

A planholder is a firm that has officially requested the bid documents for a project. Registering usually puts you on the list that receives addenda, and some owners publish planholder lists that general contractors use to find subs. Download plans through the official channel, not from a forwarded link.

How are private bids different from public bids?

Public projects are advertised openly and the documents are usually posted on the owner's site. Private work is usually bid by invitation from a general contractor or owner, and documents come through a regional plan room, a bid service, or the GC directly. Access differs by source.

Does a scanned plan set matter when pricing a bid?

Yes. A vector PDF exported from CAD can be measured exactly, while a scanned plan is only a picture and has to be traced by hand or estimated. Check whether your plans are vector or scanned before you commit to a bid deadline.

Does ReadMyBlueprint list or sell bids?

No. ReadMyBlueprint is takeoff software, not a bid board. Once you have a plan set from any source above, you can upload it and review the takeoff yourself before the bid goes out.